Silicone weather-resistant adhesive refers to the low-modulus neutral silicone sealing material used for curtain wall caulking. Before use, carefully read the correct construction method and use of silicone weather-resistant adhesive, and pay attention to the instructions on safe use and health hazards.
use
1, room temperature curing, high performance building structure with silicone sealants. It can be easily extruded for construction, and reacts with moisture in the air to solidify into an elastomer with cold resistance, heat resistance and no corrosion.
2. It has excellent weather resistance such as ozone resistance and ultraviolet resistance, giving it a long service life.
3. It has good adhesion, and no primer is needed under normal conditions. After curing, it can produce good adhesion to most building materials, such as glass, aluminum, steel and stone.
4. It has good compatibility with silicone structural adhesives, weather-resistant adhesives and neutral adhesives.
usage
1. Silicone weather-resistant adhesive can be easily punched out of the plastic bottle with a glue gun. Without a silicone gun, consider cutting the bottle with a blade and then smearing it with a spatula or wood chips. Adhesive tape can be used to cover the periphery to avoid smearing other places and make it beautiful after curing, but after gluing, it must be taken away before the skin is formed.
2. The curing process of silicone weather-resistant adhesive develops inward from the surface, and the surface drying time and curing time of silica gel with different characteristics are different, so if the surface is to be repaired, it must be carried out before the silicone weather-resistant adhesive dries.
3. The curing time of silicone weather-resistant adhesive increases with the increase of adhesive thickness. For example, the acid silicone weather-resistant adhesive with a thickness of 12mm may take 3-4 days to cure, but within about 24 hours, the outer layer of 3mm has been cured.
4. Wipe the toilet and the floor surface completely to remove oil stains, then evenly coat the silicone weather-resistant adhesive on the prepared floor surface, and then squeeze the other side with enough force to squeeze out the air. When the silicone weather-resistant adhesive is cured, be careful not to squeeze out the silicone weather-resistant adhesive.
5. Before the silicone weather-resistant adhesive is cured, it can be wiped off with a cloth or paper towel. After curing, it must be scraped off with a scraper or scrubbed with solvents such as xylene and acetone.
6. Silicone weather-resistant adhesive will release irritating gas during curing, which has irritating effect on human eyes and respiratory tract. Therefore, this product should be used in a well-ventilated environment to avoid contact with eyes or skin for a long time (wash hands after use and before eating and smoking). Keep out of the reach of children; The construction site should be well ventilated; If it accidentally spills into eyes, it should be washed with clear water and seek medical advice immediately. The fully cured silicone weather-resistant adhesive does not pose any danger.
7, before use, carefully read the correct construction method and use of silicone weather-resistant adhesive, and pay attention to the safe use and related instructions on health hazards.
Neutral Silicone Sealant, Acid Silicone Sealant, Structural Sealant, Silicone Sealant
Shandong Tongchuang Rubber Industry Co.,Ltd.
