Fast Drying Non Slumping Advanced Neutral Silicone Sealant

Product Description

9700 Advanced Neutral Silicone has a strong adhesive bond, high tensile strength, and at the same time is weather resistant, vibration resistant, and moisture resistant, odor resistant and adaptable to large changes in heat and cold. Excellent primerless adhesion to most common building substrates. Coupled with its wider applicability, it can realize the adhesion between most building materials products.

Product Features

1. One-component, acetic room temperature curing, easy to use, with good extrusibility and thixotropy in the temperature range of 4~40°C.

2. It has good adhesion to most building materials.

3. Excellent weather resistance, anti-aging, ultraviolet resistance, is an ideal weather-resistant sealing material.

Primary Use

1. Specifically designed to seal all types of door, window and wall joints.

2. All kinds of indoor decoration caulking and sealing.

Safety Information 

1. Sealant construction sites should pay special attention to maintaining a well-ventilated environment.

2. Handling cured silicone rubber does not pose any health hazard.

3. If uncured Silicone Sealant comes into contact with the eyes, flush thoroughly with water and seek medical attention if irritation persists.

4. Avoid prolonged skin contact with uncured silicone sealant.

5. The surface of the bonded substrate must be cleaned with solvents or other means, kept dry and glued within 30 minutes after cleaning to ensure that the Structural Adhesive is in close contact with the substrate and that there is no lack of adhesive, and that the adhesive has not yet been cured before trimming and removing the tape.