Payment Type:T/T,L/C,D/P,D/A,Paypal
Incoterm:CIF,FOB,CFR,CIP
Min. Order:500 Carton
Transportation:Ocean
Port:QINGDAO PORT,NINGBO PORT,SHANGHAI PORT
Model No.: 796
Brand: SHUANGYOU
Place Of Origin: China
Usage Temperature: +4℃~+40℃
Standard: GB16776-2005
Quality: Premium
Customer's Brand: Acceptable
Color Available: White,Black,Aluminum,Grey,etc
Transportation: Ocean
Place of Origin: CHINA
Certificate: ISO9001, ISO14001
HS Code: 3214109000
Port: QINGDAO PORT,NINGBO PORT,SHANGHAI PORT
Payment Type: T/T,L/C,D/P,D/A,Paypal
Incoterm: CIF,FOB,CFR,CIP
Product Description
796 Anti-Fungal Adhesive
High performance mildew Silicone Sealant is one component, neutral, room temperature curing silicone sealant, Weatherproof Silicone Sealant, non-corrosive to most building materials except copper materials, good adhesion to a variety of building materials, and can be used as a replacement for door and window sealing rubber strips.
Model NO. | 796 |
Product | Neutral Silicone Sealant |
Characteristic | Weatherability |
Volume | 300ml/350ml/450ml |
Transport Package | 24 Cartridges/20 Sausages |
Shelf Life | 9 Months |
HS Code | 3214109000 |
Certificate | ISO9001, ISO14001 |
Materials | 100% Silicone |
Color | Clear |
Origin | China |
How to use
1.Light a candle around the windows and exterior doors that you think have air leaks. If the flame dances around, there is air flow and you have a leak
2.Clean area to be sealed
3.To ensure proper adhesion, remove any old caulk and paint. Make sure the area is free from dust, grease and loose/flaking paint.
4.Prep the caulking gun
5.Cut the seal at the top of the sealant bottle,(if the gap is outside) using a knife or secateurs. Cut the nozzle at a 45° angle with an opening that is approximately the size of the hole being filled. Fit the nozzle to the top of the cartridge and insert it into the caulking gun by pushing the base of the canister into the gun.
6.Caulk the leak
7.Apply steady pressure to the caulking gun trigger to force the gap filler into the area that causes the leak. Move the nozzle along the joint in one smooth action. At the end of each section wipe excess product away with a finger, spoon or spatula dipped in a 50/50 mix of water and detergent.
8.Finish
9.Clean up the excess sealant with a damp cloth immediately. Allow it to cure for about 30 minutes before painting